Skip to content
Home Water Saving

The Quietest Way to Save Water in a Rented Apartment

The Quietest Way to Save Water in a Rented Apartment

Most water-conservation advice assumes you own the home. Replace the toilet, install a low-flow showerhead, swap out the dishwasher, run new pipes. None of that translates well to renting. If you live in an apartment or a rented house, you typically can’t make permanent changes to fixtures or plumbing, and even temporary changes might run afoul of your lease.

But renters still have real influence. The percentage of water saved with renter-friendly changes alone (no permanent modifications, no major investments, nothing the landlord can object to) can be 25 to 40 percent of total household use. That’s significant. And the techniques are all reversible at move-out. See also our related guide on toilet hardest working water user. See also our related guide on family water routine not lecture.

What’s allowed and what isn’t

First, the boundaries:

  • Generally allowed without permission: Screw-on aerators, low-flow showerheads (if you keep the original to reinstall at move-out), hose-end accessories, behavior changes, drying racks instead of dryers, anything not bolted to the wall.
  • Often needs permission: Replacing toilets, installing rain barrels in a shared yard, drilling for fixtures, modifying plumbing.
  • Almost never allowed: Replacing major appliances, re-piping, installing greywater systems.

The first category gives you almost all the savings. The other two are bonuses if you have a flexible landlord.

Aerators are the renter-friendly no-brainer

The faucet aerator is the renter’s best friend. Aerators unscrew off the existing faucet, the new one screws on in their place, and at move-out you simply swap the original back. Total cost: $5 to $10 per faucet. Total time: about ninety seconds per faucet. Total impact: a 30 to 50 percent reduction in faucet water use. The EPA WaterSense bathroom faucets program caps its labeled aerators at 1.5 gallons per minute, well below the 2.2 GPM standard on most rental fixtures.

Keep the original aerators in a labeled ziplock bag in a drawer. When you move, screw them back on. The landlord never knows anything changed; you save thousands of gallons during your tenancy.

The showerhead swap

Most rental showerheads are basic 2.5 GPM fixtures, sometimes worse. Swap with a modern 1.5 to 1.75 GPM model. The new head screws onto the existing shower arm. No plumbing skill required.

Wrap the threads in plumber’s tape, hand-tighten the new head, plus a quarter turn with a wrench. Keep the original head boxed for move-out. The whole process takes five minutes.

What works on the toilet you can’t replace

You can’t replace a rental toilet, but you can do two things:

  1. Test for leaks. The food coloring test takes ten minutes. If your tank leaks into the bowl, tell the landlord. Repair is their cost; you benefit from the saved water on your bill.
  2. Add a displacement bottle. A partially water-filled plastic bottle in the tank, positioned where it doesn’t interfere with the flush mechanism, reduces each flush by roughly half a gallon. Test for a few days to make sure the toilet still clears in one flush. If yes, keep the bottle. Costs nothing.

The displacement bottle saves about 500 to 800 gallons a year per toilet. The leak fix, if there is one to find, can save thousands.

The behavior changes that don’t require any installation

The biggest wins for renters are in habits, not hardware:

  • Shorter showers. The single highest-impact behavior change. A song-length shower saves 1,500+ gallons a year per person.
  • Tap off while brushing teeth. Saves several thousand gallons across a year.
  • Full loads only. Whether laundry in the apartment or at a shared facility, half-loads waste water.
  • No pre-rinsing. Scrape dishes, then load. Modern detergent handles the rest.
  • Cold water in the laundry. Same clean clothes, half the energy.
  • Catch warm-up water. A two-quart container under the shower captures the cold water before hot arrives. Use it for plants or filling the kettle.

The kitchen sink in an apartment

Apartments often have small kitchens with cramped sinks, which actually helps with conservation. The single most useful kitchen change for renters is a faucet aerator (already discussed) and one habit: plug the sink and wash dishes in a basin instead of under a running tap. Even with a small basin, the savings are dramatic. Two gallons for a basin wash versus eight to twelve gallons for a running-tap wash.

The water-bill question

In many apartments, water is included in rent or billed at a flat rate. In those cases, your savings don’t show up on your own bill. They show up on the landlord’s. That can feel demotivating. A few framings that help:

  • Reduced water use also reduces hot-water energy use, which is often on your bill.
  • The environmental impact is real regardless of who pays.
  • If enough tenants reduce consumption, the building’s overall water bill drops, which sometimes translates to slower rent increases.
  • You’re building habits for the home you’ll eventually own or rent under different conditions.

Talking to the landlord

For larger changes, a low-flow toilet or a new washer, you’ll need landlord permission. The pitch that usually works is some version of: “I’d like to make a few water-efficiency upgrades that would save money on the building’s water bill. I’ll pay for the materials and installation; the fixtures stay with the unit when I move out.” Many landlords say yes to this, especially if the building is older. According to EPA WaterSense statistics, replacing older fixtures can cut indoor water use by roughly 20 percent, which is a straightforward pitch to a cost-conscious owner.

Put the agreement in writing. A short email exchange is fine. You want a record that you have permission to install and that the new fixtures stay with the property.

What we recovered as renters

Before we owned a home, we spent six years renting an older apartment with terrible original fixtures. Aerators on three faucets, a new showerhead, and a displacement bottle in the toilet cost about $45 upfront. We never told the landlord. At move-out, we swapped everything back to original.

The water bill was on the landlord. The energy bill was on us. Our hot water heating costs over those six years were noticeably lower than the previous tenants’ (the landlord mentioned it, comparing usage patterns), and we figure we saved somewhere in the neighborhood of 80,000 to 120,000 gallons of water across the tenancy. None of which the landlord ever paid for and we ourselves didn’t see on a bill.

It still mattered. Renters can’t always opt into the financial reward of conservation, but the environmental and habitual rewards remain. And the habits you build as a renter carry forward into every home you live in afterward.

Frequently Asked Questions

Do I need landlord permission to install a low-flow showerhead?

Usually no, as long as you keep the original and reinstall it at move-out. Check your lease for fixture-modification clauses, but most leases permit easily reversible swaps.

What if my apartment doesn't have a separate water meter?

Many apartments don't. The savings won't show up on your own bill, but you still save on hot-water energy, and you're building habits that pay off in any future home.

Can I install a rain barrel on a balcony?

Some buildings allow it; some don't. Check first. If allowed, a small balcony rain barrel (5-15 gallons) can supply container plants for weeks.

What's the highest-leverage change for a renter?

Habit changes, especially shorter showers and turning off the tap while brushing. Hardware changes help, but behavior is where renters actually have full control.

Should I tell my landlord I'm making these changes?

For aerators and showerheads, generally not necessary. For larger changes (washer, toilet), yes, and try to get written permission.